Buybits ZS Stick Anywhere Multi Surface Suction Car Dashboard Mount for the Garmin Rino 610, 650, & 655t for Sale - Review & Buy at Cheap Price
Buybits ZS Stick Anywhere Multi Surface Suction Car Dashboard Mount for the Garmin Rino 610, 650, & 655t Feature | Sale - Review & Buy at Cheap Price
- Multi-surface car mount for Garmin Rino 610, 650, & 655t. Use on any flat surface. Works on textured & smooth dashboards.
- Only requires 70mm of flat area to hold. Bespoke holder. The PU coated lever release suction cup gives reliable vacuum grip that holds firm to just about any surface within your car.
- The ZS Multi Surface Mount uses a special PU coated 60mm suction cup which, although tacky to touch, it is NOT adhesive so it can be removed and re- applied as many times as you like allowing you to adjust it's position or transfer it between vehicles.
- So versatile, neat enough for small cars and perfect for larger vehicles such as Motorhomes, MPVs, Lorry Cabs, Transit Vans. If your vehicle has a deep dash or steep sloping windscreen, the ZS Multisurface Mount allows you to bring your SatNav closer to you for easier viewing.
- Arm length approx 60mm - low level design, neat and unobtrusive.
|
|
|
| Brand: |
|
| List Price: |
|
| Our Price: |
|
| Total Price: |
|
| Usually ships in 1-2 business days |
[if
Car mount for the Garmin Rino 610, 650, & 655t.
Dedicated slide on cradle. Use on FLAT SURFACES - SO EASY - NO NEED FOR ADDITIONAL DASH DISCS or FRICTION MOUNTS.
It adheres with ease to dashboards, console areas and glass and gives you a reliable holder for your Garmin Dakota 10 & Dakota 20.
Apply directly to the dashboard, console or windscreen.
The ZS Multi Surface Mount uses a special PU coated 60mm suction cup which, although tacky to touch, it is NOT adhesive so it can be removed and repositioned.
The PU coated lever release suction cup gives reliable vacuum grip that holds firm to just about any surface within your car.
Requires a minimum flat area of just 70mm. Use on textured or smooth dashboards.
So versatile, neat enough for small cars and perfect for larger vehicles such as Motorhomes, MPVs, Lorry Cabs, Transit Vans. Ideal for deep dashboards or steep sloping windscreen - bring your GPS closer to you for easier viewing.
Arm length approx 60mm - low level design, neat and unobtrusive.
To apply:
Select your chosen position, ensure it is clean, dust free.
Remove the protective film from the sucker.
Position & pull down the lever to expel the air and create the vacuum.
Give it a wiggle to ensure it's holding firm then insert your device.
To remove; Just lift the lever and pull on the release tab to break the vacuum. The ZS mount can now be removed
NOTE: Please do not just pull the mount off the surface, you WILL damage it.
Washable; Although your car is probably spotless, dust, fluff & grease can build up on the suction cup causing the suction to fail. If this happens simply rinse the sucker under a running tap & leave to air dry.
Not suitable for oiled areas, loose covered dashboards or areas cleaned with wax or grease treatments.
]
Buybits ZS Stick Anywhere Multi Surface Suction Car Dashboard Mount for the Garmin Rino 610, 650, & 655t Overview | Sale - Review & Buy at Cheap Price
Car mount for the Garmin Rino 610, 650, & 655t.
Dedicated slide on cradle. Use on FLAT SURFACES - SO EASY - NO NEED FOR ADDITIONAL DASH DISCS or FRICTION MOUNTS.
It adheres with ease to dashboards, console areas and glass and gives you a reliable holder for your Garmin Dakota 10 & Dakota 20.
Apply directly to the dashboard, console or windscreen.
The ZS Multi Surface Mount uses a special PU coated 60mm suction cup which, although tacky to touch, it is NOT adhesive so it can be removed and repositioned.
The PU coated lever release suction cup gives reliable vacuum grip that holds firm to just about any surface within your car.
Requires a minimum flat area of just 70mm. Use on textured or smooth dashboards.
So versatile, neat enough for small cars and perfect for larger vehicles such as Motorhomes, MPVs, Lorry Cabs, Transit Vans. Ideal for deep dashboards or steep sloping windscreen - bring your GPS closer to you for easier viewing.
Arm length approx 60mm - low level design, neat and unobtrusive.
To apply:
Select your chosen position, ensure it is clean, dust free.
Remove the protective film from the sucker.
Position & pull down the lever to expel the air and create the vacuum.
Give it a wiggle to ensure it's holding firm then insert your device.
To remove; Just lift the lever and pull on the release tab to break the vacuum. The ZS mount can now be removed
NOTE: Please do not just pull the mount off the surface, you WILL damage it.
Washable; Although your car is probably spotless, dust, fluff & grease can build up on the suction cup causing the suction to fail. If this happens simply rinse the sucker under a running tap & leave to air dry.
Not suitable for oiled areas, loose covered dashboards or areas cleaned with wax or grease treatments.
*** Product Information and Prices Stored: Sep 23, 2011 01:20:13
Tags : for Sale . hp touchpad case with stand free mp3 downloads sandisk panasonic tv lamp
